home *** CD-ROM | disk | FTP | other *** search
- Current Video and Printer Drivers
- =================================
-
- VIDEO DRIVERS: as of February, 1993
- =============
-
- This is a current listing of the video drivers included with CompuShow.
-
- - 16 color 1024x768 requires a 512K VGA,
- - 256 color 640x480 requires a 512K VGA,
- - 256 color 1024x768 reguires a 1M VGA, and
- - 256 color modes on an 8514/A adapter require the memory expansion.
-
- Also, VGA adapters that are built-in to a system board or bundled with a
- computer (unless you're getting a specific name-brand board), are frequently
- low-end (cheap) adapters, and probably don't have "Super-VGA" capabilities.
- Finally, remember that all IBM standard graphics modes are 'built-in' to
- the program. If your graphics adapter doesn't go beyond the standard modes,
- then you don't need a video driver.
-
- A2=ATI GraphicsSolution
- 320x200x16 640x200x16
-
- A3=Ahead Systems
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256 1024x768x256
-
- A4=Amstrad PC1512
- 640x200x16
-
- A5=ATI VGAs
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256 1024x768x256
- 640x480x32k
-
- A6=AT&T 6300
- 640x400x2 640x400x16
-
- A7=AcuMos
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256
-
- A8=AT&T DEB
- 640x400x16
-
- C1=Chips & Technologies
- 800x600x16 640x400x256 640x480x256 800x600x256
-
- C2=Compaq QVision
- 640x480x256 1024x768x256 640x480x32k 512x480x16m 640x400x16m
-
- C3=Cirrus
- 640x400x16 720x540x16 800x600x16
-
- D1=DGIS
- [Available modes depend on the video adapter and DGIS interface]
-
- D2=Diamond Speedstar 24
- 640x400x256 640x480x256 800x600x256 1024x768x256 640x480x32k 800x600x32k
- 640x480x16m
-
- [DRIVERS.DOC] Page 1
- E1=Everex VGAs
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256 1024x768x256
-
- G1=Genoa 6400 GVGA
- 800x600x16 1024x768x16 512x512x256 640x350x256 640x400x256 640x480x256
- 800x600x256
-
- H1=Hercules GraphxStatn
- 640x400x256 640x480x256 800x600x256 1024x768x256 1024x768x256 640x480x32k
- 512x480x16m
- [The first 1024x768x256 is interlaced, the second is non-interlaced]
-
- H2=Hercules InColor
- 720x348x16
-
- I1=IBM (generic) CGA
- 160x100x16
-
- I3=IBM PGC
- 640x480x256
-
- I4=IBM 8514/A [single]
- 640x480x16 1024x768x16 640x480x256 1024x768x256
-
- I5=IBM 8514/A [dual]
- 640x480x16 1024x768x16 640x480x256 1024x768x256
- [Load the "adapter interface" (HDILOAD) in AUTOEXEC.BAT]
-
- I7=IBM XGA
- 1024x768x16 640x480x256 1024x768x256 640x480x64k
-
- N1=NCR
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256 1024x768x256
-
- O1=Oak Technologies
- 800x600x16 1024x768x16 640x480x256 800x600x256 1024x768x256
- [see "CAUTION", below]
-
- P1=Paradise/WestrnDigtl
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256
-
- P2=Plantronics
- 320x200x16
-
- S1=STB EM16+
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256 1024x768x256
-
- S2=STB Ergo+Sierra DAC
- 640x400x256 640x480x256 800x600x256 1024x768x256 320x200x32k 640x480x32k
- 800x600x32k
-
- T1=Tseng 3000
- 800x600x16 1024x768x16 640x350x256 640x480x256 800x600x256
-
- T2=Tandy 1000SL/TL
- 640x200x16
-
-
- [DRIVERS.DOC] Page 2
- T4=Tseng 4000
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256 1024x768x256
-
- T5=Trident VGA
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256 1024x768x256
-
- T6=Tseng4000+Sierra DAC
- 640x400x256 640x480x256 800x600x256 1024x768x256 640x400x32k 640x480x32k
- 800x600x32k
-
- T7=TIGA
- [Available modes depend on the video adapter and TIGA interface]
-
- V1=Video 7
- 800x600x16 1024x768x16 640x400x256 640x480x256 800x600x256 1024x768x256
-
- V2=VESA BIOS Extensions
- 800x600x16 1024x768x16 1280x1024x16 640x400x256 640x480x256 800x600x256
- 1024x768x256 1280x1024x256 640x480x32k 800x600x32k 1024x768x32k
- 1280x1024x32k 640x480x64k 800x600x64k 1024x768x64k 1280x1024x64k
- 640x480x16m 800x600x16m 1024x768x16m 1280x1024x16m
- [Maximum of FIFTEEN of the above modes. NOTE: If there are fewer than 15
- modes and your "VESA compliant" VGA should support mode(s) that don't appear
- in CompuShow, contact the BOARD MANUFACTURER. The reason they're not shown
- is because the video BIOS (the software part of the board) says it can't do
- those mode(s), so the "fix" HAS TO COME FROM THE BOARD MANUFACTURER!]
-
- CAUTION: Problems with Oak VGAs
- -------------------------------
-
- There seems to be a serious problem with the Oak BIOS, and if you try to use
- CSHOW to display an Oak mode which isn't available on your VGA, it will
- still attempt to set the graphics mode, and throw the VGA into a
- configuration where it will no longer do ANY extended graphics modes until
- you re-boot! To work around this Oak BIOS bug:
-
- - SETUP O2 K
-
- - Use CSHOW to display a graphic in each video driver mode (the letters K,
- L, M, etc.) UNTIL YOU ENCOUNTER A MODE THAT DOESN'T WORK.
-
- - Re-boot the computer and continue testing.
-
- - Once you have a list of the modes which DO WORK, do a setup using those
- letters: SETUP O2 KLMN
-
-
-
-
-
-
-
-
-
-
-
-
-
- [DRIVERS.DOC] Page 3
- Printer Drivers: as of February, 1993
- ----------------
-
- Note that the <Q>uality print mode of MOST COLOR PRINTERS and the LASERJET
- and DESKJET at 300dpi requires MORE THAN 640k of memory, as CompuShow must
- expand, rescale and dither the entire image to the 'virtual screen' (VScreen
- on the Shift-F1 box), before it starts to print. This means if you don't have
- EMS or XMS memory, you'll be limited to the <F>ast print mode.
-
- The following printer drivers are included with the enhanced program:
-
- Color Printer Drivers
-
- =============================================================================
- IBM Color Printer Vertical dot spacing is 84 dpi.
- Single Density: esc,'K',n1,n2 Prints at 84 dots/inch.
- Double Density: esc,'L',n1,n2 Prints at 168 dots/inch.
- =============================================================================
- Color 8 pin (EX-800) GENERIC 8 pin color driver for 24/216" graphics
- line spacing. Tested on a Star NX-1000 Rainbow and
- Citizen MSP-50. Similar to EX-800, LX-800, FX-86e,
- LX-86, LX-80.
- Single Density: esc,'*',0,n1,n2 Prints at 60 dots/inch.
- Dual Density: esc,'*',1,n1,n2 Prints at 120 dots/inch.
- =============================================================================
- Color 8 pin (JX-80) Identical to COLOR8A, except for 20/180" line
- spacing. Similar to JX-80, LQ-1500, ALPS ALQ200.
- Single Density: esc,'*',0,n1,n2 Prints at 60 dots/inch.
- Dual Density: esc,'*',1,n1,n2 Prints at 120 dots/inch.
- =============================================================================
- Color 24 pin (LQ-2550) GENERIC 24 pin color printer for 24/216" graphics
- line spacing. Similar to LQ-2550.
- Single Density: esc,'*',0,n1,n2 Prints 8 pins at 60 dots/inch.
- Dual Density: esc,'*',33,n1,n2 Prints 24 pins at 120 dots/inch.
- CRT III: esc,'*',38,n1,n2 Prints 24 pins at 90 dots/inch.
- =============================================================================
- Okidata 290 series color Tested on a model 292.
- Single Density: esc,'K',n1,n2 Prints at 60 dots/inch.
- Double density: esc,'L',n1,n2 Prints at 120 dots/inch.
- =============================================================================
- HPPAINT.DRV The Hewlett Packard PaintJet.
- (mono fast) esc,'*t90R',esc,'*r1U' 90 dpi monochrome
- (mono quality) esc,'*t180R',esc,'*r1U' 180 dpi monochrome
- (color fast) esc,'*t90R',esc,'*r3U' 90 dpi 8 colors
- (color quality) esc,'*t90R',esc,'*r4U' 90 dpi 16 colors
-
-
-
-
-
-
-
-
-
-
-
-
-
- [DRIVERS.DOC] Page 4
- Monochrome Printer Drivers
- =============================================================================
- IBM/EPSON 8pin (n/216") a GENERIC driver for 8 pin printers that specify
- line spacing in multiples of 1/216"
- Single Density: esc,'K',n1,n2 Prints at 60 dots/inch.
- Double Density: esc,'L',n1,n2 Prints at 120 dots/inch.
- =============================================================================
- IBM/EPSON 8pin (n/180") a GENERIC driver for 8 pin printers that specify
- line spacing in multiples of 1/180"
- Single Density: esc,'K',n1,n2 Prints at 60 dots/inch.
- Double Density: esc,'L',n1,n2 Prints at 120 dots/inch.
- =============================================================================
- Citizen MSP 10/15/20/25 a GENERIC driver for 8 pin printers that support 72
- and 144 dpi.
- One-to-one esc,'*',5,n1,n2 Prints at 72 dots/inch.
- Two-to-one esc,'*',7,n1,n2 Prints at 144 dots/inch.
- =============================================================================
- KX-P2624 (24 pin: LQ1050) for 24 pin Epson compatible printers.
- CRT II: esc,'*',6,n1,n2 Prints 8 pins at 90 dots/inch.
- Double Density: esc,'*',33,n1,n2 Prints 24 pins at 120 dots/inch.
- =============================================================================
- KX-P2624 (ProPrntr XL24E) for the IBM Pro Printer XL24E and compatibles.
- Double Density: esc,'[g',n1,n2,1 Prints 8 pins at 120 dots/inch.
- Double Density: esc,'[g',n1,n2,9 Prints 24 pins at 120 dots/inch.
- =============================================================================
- HP DeskJet 75/300 dpi prints slightly darker than the LaserJet driver.
- 75 dpi esc,'*t75R' Prints at 75 dots/inch.
- 300 dpi esc,'*t300R' Prints at 300 dots/inch.
- =============================================================================
- HP LaserJet 75/150 dpi for Laser Jets with limited memory installed.
- 75 dpi esc,'*t75R' Prints at 75 dots/inch.
- 150 dpi esc,'*t150R' Prints at 150 dots/inch.
- =============================================================================
- HP LaserJet 75/300 dpi for Laser Jets with adequate memory installed.
- 75 dpi esc,'*t75R' Prints at 75 dots/inch.
- 300 dpi esc,'*t300R' Prints at 300 dots/inch.
- =============================================================================
- HP Thinkjet [MDL 2225C] supports 96 and 192 dpi.
- Single Density: esc,'K',n1,n2 Prints at 96 dots/inch.
- Double Density: esc,'L',n1,n2 Prints at 192 dots/inch.
- =============================================================================
- IBM Compact has one graphics mode, at 70 dpi
- Single Density: esc,'L',n1,n2 Prints at 70 dots/inch.
- =============================================================================
- NEC 8023 May also work with the C.Itoh Prowriter.
- Bit-Image: esc,'S',a1,a2,a3,a4 Prints at 80 dots/inch.
- =============================================================================
- Okidata ML92/ML93 prints 7 pin graphics.
- 10 pitch: 30,3 Prints at 60 dots/inch.
- 12 pitch: 28,3 Prints at 72 dots/inch.
-
-
-
-
-
-
-
-
- [DRIVERS.DOC] Page 5
-